Richard's Tech Reviews

Don't buy an HP printer

Summary

Don't buy an HP printer.

HP has a dark pattern business model where they want to lock you in to an app-based, subscription-based, surveillance-based business model.  If you refuse to sign up, the printer will literally stop printing.

But you can refuse to participate by not buying an HP printer.

I'm saying this as someone who is surrounded by HP computers, but given that they have embraced this despicable business model for printers, you probably shouldn't buy any HP products anymore at all.

Details

HP printers with an "e" on the end are evil.  No wait, I mean they are mandatory HP+ printers.

You might think you bought a printer, and that you own it, and you can just print to it over USB, but actually HP considers that it is their printer, and they can turn it off whenever they want if you don't obey them.

Even if you print solely over USB, eventually an internal counter will click over and that's it.  It won't print any more.  It will just cough up an "error" message:

Your HP+ printer must be set up using the HP Smart app. Visit (website) to download the app and complete the guided setup.  Any pages you printed were intended for setup and have been exhausted. ...

I will also mention it is profoundly unethical for a programmer to have written the code that disables this printer, but the onus is really on their employer who came up with this terrible business model.

HP argues entirely disingenuously that the onus is on you, the busy consumer, to somehow know that all the "e" printers have this business model and to in the spirit of the free market simply select a different non-"e" HP printer.

Well, what I'm going to do in the free market is never, ever, buy anything from HP again.

Meanwhile, my now-crippled HP LaserJet M140we is going into the garbage, contributing to a stream of electronic waste that this industry cheerfully creates.

If you want more on the history of HP and other printer companies doing terrible things, you can read Boing Boing https://boingboing.net/tag/hp

Emergency Workaround

If you're lucky, the printer may print the very first page (and only the very first page) you send it over USB at startup, so you may be able to print multiple pages using the painful workaround of repeatedly turning the printer on and off and sending one single page after another.

Measuring PM2.5 air quality with a Raspberry Pi and Nova PM SDS011 sensor

Ryder Damen on Tom's Hardware has a straightforward project - How to make a Raspberry Pi Home Air Quality Monitor.  After a small bug fix, it worked well.

My hardware:

• Raspberry Pi 3
• Nova PM SDS011 sensor

Clean Raspberry Pi Install

Hardware:

• SanDisk microSD card
• SanDisk microSD-to-SD adapter
• Apple USB-C SD card reader

Software:

• Raspberry Pi Imager

I just followed the steps on Getting Started - Setting up your Raspberry Pi.

I downloaded the Raspberry Pi Imager, installed it on my Mac, and then installed the default Raspberry Pi OS 32 bit image on my MicroSD card.

I used the advanced options available in Imager by clicking the cogwheel in order to set the Raspberry Pi device name and a non-default username and password for the root account.

Once the MicroSD was reformatted and had the Raspberry Pi OS installed and verified on it, I safely ejected the card (actually I just powered down the Mac, which has the same effect).

Insert the MicroSD and Power Up the Pi

With a new clean install of Raspberry Pi OS ready on the MicroSD, I inserted the MicroSD into the Raspberry Pi and powered up.

I already have a keyboard and mouse on a USB hub (so a single USB-A connector) and a small HDMI monitor.

For networking I just plugged the Raspberry Pi directly into my Ethernet network.

Everything booted up fine, I disabled Bluetooth since it was unnecessary and then I opened a command line and followed the article steps.  I did everything with the root account, which is not a best practice but is the fastest way to get going for this type of single-use experiment.

Follow the Article Steps

After that I just followed the steps in the article.

https://www.tomshardware.com/how-to/raspberry-pi-air-quality-monitor

1. sudo apt-get update && sudo apt-get install -y git

2. cd ~/
   git clone https://github.com/rydercalmdown/pi_air_quality_monitor.git

3. cd pi_air_quality_monitor
   make install

4. make build

make build will take some time. It took about 15 minutes on my Raspberry Pi 3. But you only have to do it once.

5. Connect the SDS011 sensor to the USB adapter it comes with using the provided jumper cable, then
   Connect the SDS011 USB adapter to your Raspberry Pi.
6. There is a bug in the code

You need to edit the file

src/templates/index.html

and change the line (line 35)

$.getJSON('http://10.0.0.172:8000/api/', function(data) {`

to

$.getJSON('/api/', function(data) {`

You can use e.g. the built-in nano editor to do this edit.  (I have also submitted it on GitHub as a pull request - 17 Update index.html)

Otherwise without this change the hardcoded web address (IP address) will cause the web server to fail with a misleading error.

7. make run

8. Navigate to your Pi’s local IP (127.0.0.1) address on port 8000 to view the web server, and a graph of recent measurements of air quality.
   i.e.
   http://127.0.0.1:8000/

IMPORTANT NOTE: This web page does not auto-refresh.  It will start out as a blank graph underneath the text "Raspberry Pi Air Quality Monitor".  You have to manually reload the page (by e.g. clicking the circle arrow) to get the latest data.

Many people were saying their sensor or the code wasn't working, but actually all you need to do is reload the web page.

Any Port in a Particle Storm

I was worried that the four USB ports on my Pi 3 would have some unique numeric binding, but they don't.  With my keyboard and mouse on a single connection through a USB hub, and the SDS011 as the only other USB device, whichever port I plugged the SDS011 into became ttyUSB0 , so it wasn't an issue.

Testing 999

As the reading is normally just steady, I did a -- NOT RECOMMENDED AT HOME -- smoke test by intentionally burning some toast.  This set off my fire alarm and also caused my Temtop M10 PM2.5 sensor to go to its highest reading, 999. 

The on-screen readings from the Nova PM SDS011 responded as expected, so it definitely works.

I also ended up doing an unintentional smoke clearing test, which told me that it takes my air filters 40 minutes to clear the air from unsafe to safe levels.

The Raspberry Pi graph responded to the declining counts as I would expect.  The count wasn't exactly the same as the Temtop M10, but this is to be expected as the Nova PM 2.5 is reading over a shorter time interval.

Going Public

Be aware that this web server is also running on your Raspberry Pi's public IP, not just on localhost.  I solved that problem simply by pulling the Ethernet cable, but you may not have such an easy solution depending whether your Pi is on Wi-fi and what else you are doing with your device.

Conclusion

With the exception of the bug (which the code author really should fix) and the fact that the web page doesn't auto-refresh, this is a quick and easy project to get your own PM2.5 (and PM10) sensor readings.

Bug aside, thanks to Ryder Damen for making such a straightforward no-solder project possible.

Security Note

You should be mindful of the security issues that might be associated with running this as a service on port 8000 of your Pi's public IP (ideally the code should be modified to allow the option of a local service only).

Annex: Buying a Nano PM SDS011

I could only find a wide variety of vendors on Amazon.

I'm in Canada, I got my SDS011 on Amazon Canada from risingsaplings in the States for $55.  I liked that it shipped from Amazon USA, so that I had confidence there actually was a real product and that its shipping would be well tracked.

/risingsaplings-Precision-Quality-Detection-Digital/dp/B0BPQQ24ZR/

You can get much cheaper prices from Amazon Canada by going with other vendors that ship themselves from Canada.  Just search for SDS011.  I can't provide any comment on the other vendors or the reliability of their shipping, I have no idea.